| Step | | Procedure & Parts & Tools |
| 1 |
|
REMOVE THE 6 SCREWS FROM THE HANDLE.
| Screwdriver-phillips |
|
|
| 2 |
|
PULL THE COVER/CONTROL PANEL FROM THE MACHINE. NOTE: YOU WILL NEED TO REMOVE THE TOP SCREW FROM THE CONTROL BOARD, SLIDE IT OVER TO REMOVE THE HANDLE SCREW BEHIND IT.
| Screwdriver-phillips |
|
|
| 3 |
|
REMOVE THE 14 SCREWS HOLDING THE HANDLE TOGETHER.
| Screwdriver-phillips |
|
|
| 4 |
|
PULL THE HANDLE APART TO LOCATE THE RED MICROSWITCH.
|
| 5 |
|
LIFT THE WHITE BOX AND MICROSWITCH OUT OF THE HANDLE.
|
| 6 |
|
PULL THE MICROSWITCH FROM THE WHITE BOX.
|
| 7 |
|
PLACE LEADS ON WIRES ON MICROSWITCH. SET THE VOLT METER TO CONTINUITY. IF THE METER BEEPS, THE SWITCH IS GOOD. IF THE SWITCH IS OKAY, REVERSE STEPS 1 THRU 6 TO REASSEMBLE THE MACHINE.
|